| |
Strainers, Drain Traps, & Thermostatic Mixing Valves for Dog Wash Tubs.
Tub Strainer
Click for schematic
Stainless-steel, rust-free construction.
Flat, stainless-steel grid (removable) that keeps hair out of drain without clogging as quickly as concave strainer baskets.
For 3 1/2" - 4 1/2" diameter hole.
Includes die-cast locknut & slip nut, rubber washer & fiber washer, polyethelyne tailpiece washer.
Smartway Hair Interceptor
Click for schematic
Cleanout cylinder that traps hair and easily lifts out from top of drain for cleaning.
Easy to install.
Includes basket strainer and 6" cylinder strainer.
 Hair Trap
Click for installation info
Easy access, removable strainer for quick cleanout in seconds. Simply loosen slip-joint nut by hand and pull out strainer.
Includes connectors and gaskets for 1-1/4" and 1-1/2" drain pipes.
Manufacturer 3-year warranty!
Can also be used in homes and RV's to prevent loss of jewelry and other objects.
Anti-Siphon S-Trap
Click for schematic
Heavy-duty cast brass body with chrome finish.
1 1/2" inlet and outlet.
Easy access clean-out without having to disconnect pipes.
Includes nuts, washers, and deep flange.
NOTE: Anti-Siphon traps are required by code in some areas/applications.
Anti-Siphon P-Trap
Click for schematic
Same as above, except "P" design for higher or in-wall drain lines.
DynaFluid Thermostatic Mixing Valve
Simple, economical solution for fast, temperature-controlled warm water for tubs, or hot water for washing down kennel floors and cages, etc.
Cut-a-way image and dimensional drawings (.pdf file)
Control knob adjusts water temperature from 60 to 140 degrees (90 to 95 degrees recommended for pet washing). Under normal conditions, temperature is held within +/- 5 degrees.
Fail safe design: Immediate shut-off in the event of cold water failure.
Can be installed wherever a ready supply of hot water is available.
7 PSI to 90 PSI operating pressure (150 PSI static pressure).
Requires no gas or electricity.
Designed by T&S Brass - quality made throughout for long life.
Simple to maintain. Can be serviced without removal.
Replaceable temperature control cartridge.
Complete with strainers and check valves.
Connections are industry standard 3/4" NPT female threads, with 6"
(150mm) pipe centers.
Flow Rates
|
Pressure (PSI) |
10 |
20 |
30 |
40 |
50 |
60 |
70 |
80 |
90 |
| Flow rate (GPM) |
6 |
8.5 |
10 |
12 |
13 |
14.5 |
16 |
17.5 |
19 |
Note: Single-inlet faucets are generally used with thermostatic mixing valves, as hot and cold water does not have to be mixed at the faucet.
Mixing Valve with Thermometer and Tee
Includes stainless-steel thermometer with brass thermometer tee.
Attaches to valve for easy and accurate temperature setting.
Home | Tub Info | Ordering Info | Links
Poly Pet Tubs | Step-Up Tubs | 16-Gauge Tubs | Economy Tubs
Faucets & Sprayers | Plumbing | Bathing Systems | Tub Mats
2Checkout.com, Inc. is an authorized retailer of goods and services provided by PetTubs.com.
|
|
